The rule of mankind and the development of civilizations began with mans control over the power of fire. From time to time this power created out-of-control fires causing man to develop and implement various techniques to regain control over this destructive force. First, man tried using water. Later, having considered the growth of industry, mankind looked for other types of extinguishers, realizing that using water as an extinguisher was inefficient. Thus began the utilization of gases such as CO2, powders and, finally, foams for extinguishing purposes.
1. A fire starts when three main ingredients heat, a flammable material and oxygen interact simultaneously. This is called the Fire Triangle. There are several classifications of fires including the following:
- A. solid material fires (wood, timber, etc.)
- B. fluid material fires (petrochemical derivatives, oil fires, etc.)
- C. gas fires (LPG, natural gas, etc.)
- D. metallic fires (sodium, potassium, magnesium, etc.)
- E. electrical fires
The extinguishing process is realized by breaking the Fire Triangle through the elimination of one or two of the three ingredients. There are several extinguishing agents for this purpose. Fire departments use one or more of these agents according to the type of fire and conditions of the site. A general classification for these types of extinguishing combinations follows:
- 1. extinguishing agents used with water
- 2. extinguishing agents used with extinguishing gases
- 3. dry chemical powders
- 4. foams and foam mixtures
- 5. new technologies
2. Great progress in technology in recent years has initiated advancements in all areas of industry, generating thousands of new synthetic materials. And, many new manufacturing facilities were created in order to produce these new materials.
3. It is known that standard extinguishing systems are insufficient for fires created by the ignition of these new synthetic materials (plastics, nylons, new petrochemical derivatives, etc.). We hereby present you with an entirely new technology
The Technology of Perfect Science A.D.
The Technology of Perfect Science A.D. was developed through many years of research for the purpose of eliminating the destructive actions of hydrocarbons on earth, thus saving the ecological balance of the earth.
The Perfect Science A.D. Formula:
1. Base Formula covers the different alkaline materials homogeneously and carries an expansion characteristic; it homogeneously integrates fluids having different viscosities; it never affects the characteristics of integrated material the material maintains its chemical composition; the base formula is organic and has a pH value of 7.
2. Premix Formula has the characteristic of being able to break down compositions; the Premix Formula becomes active, breaking down the chemical compositions when mixed in the Base Formula at a rate of 3% or 4%.
The Formula of Perfect Science A.D.:
- 93% water
- .3% binders
- 34% alkaline (ionisators)
- 3% Base Formula
*The percentages mentioned above vary according to the application areas. The Base Formula remains the same.
Using P.S.T. as Fire Extinguishing Agent
P.S.T. eliminates all limitations encountered in other fire extinguishing agents. It:
1. can be used effectively against all A, B, C, D and E types of fires and their variations.
2. acts on two, sometimes three, elements of the Fire Triangle at the same time, simultaneously eliminating the heat; chemically holds the oxygen in the area (O2 = O3 cycle) and alters the environment by covering the flammable material.
3. is superior to all other extinguishing agents except water in view of properties. Namely, it
- has an indefinite shelf life
- is non-corrosive to its container (has anticorrosive properties), thus does not require special containers for storage
- does not require special environmental conditions for storing (heat, humidity, pressure conditioning, etc.)
The Perfect Science A.D. formula is greatly superior to foams for several reasons:
a) Foams require special equipment that combine specific proportions of materials with air.
b) The Perfect Science A.D. formula can be sprayed a much greater distance than conventional foams, using standard water hoses/pipes, producing a foam only upon contact with the o
No comments:
Post a Comment